iPod Touch

How to Take a Screenshot on Your iPod Touch

iPod Touch

Have you ever wished you could capture the screen of your iPod Touch, right at any given moment? Say, to memorialize an epic moment in Doodle Jump, or to snap a photo of a webpage. Well, actually, you can–and it’s really simple.

Here’s all you need to do to take a screenshot on your iPod Touch (yes, it works on the iPhone too):
  1. Press and hold the power button (on top of the device).
  2. While you’re holding down the power button, hit the Home key (the black, circular button) once. You will hear a “snapshot” sound (like a shutter).
  3. Release both buttons.  In order to find your iPod Touch screenshot, just go to your Photo library.

-

How To Save Battery Life on Your iPod Touch

Conserve your iphone battery with just these few simple tips.

Sarah Jacobbson Purewell | TiPS

So you’re about to take that big around-the-world trip, and you only have one problem–your iPod Touch keeps dying mid-plane ride. Unless you’re flying Virgin America, there’s no chance of recharging until you hit the ground. So what should you do, next time, in order to keep your battery from running out of juice?

Here are some battery-saving tips, specifically for the iPod Touch:

1. Turn your screen brightness all the way down. This should be pretty obvious–the brighter your screen is, the more battery life it uses. Assuming you’re in a well-lit (or very dark) area, you’ll still be able to see your way around the iPod Touch enough to change songs.

2. Turn your passcode lock off. In order to conserve battery life, it’s imperative that you spend as little time as possible getting from point A to point B on your iPod Touch, and having to enter a passcode every time you want to do something definitely hinders this.

3. Turn off Wi-Fi. Another fairly obvious measure–Wi-Fi eats up a lot of battery life searching for networks and once it’s connected to them.

4. When you’re not using your iPod Touch, don’t turn it off. Instead, put your iPod Touch in “sleep” mode (screen lock, essentially)–it takes more energy to turn the iPod on and off than it does to leave it in sleep mode.

5. Turn off push notifications. Anything that updates in the background and “pushes” or notifies you is a battery-life suck.

6. Let your iPod Touch die once a month. Unlike older rechargeable batteries, the iPod’s lithium-based battery needs to go through a full cycle at least once a month before you recharge it.

7. Don’t use a lot of apps. If you want your iPod Touch battery to last as long as possible, use as few applications as necessary.

How To Use Your iPod as an External Hard Drive

Sarah Jacobsson Purewal TiPS

Use your iPod as a Hard Drive

Why waste your money on an external hard drive or a flash drive when you already have one? One that you carry around with you all the time as it is?

Using your iPod, iPod Nano, iPod Shuffle, or iPod Touch as a portable external hard drive is useful and easy. All you have to do is plug your iPod into your computer and open iTunes. Click on your iPod and check the box that says “Enable Disk Usage.” Once this box is checked, you’ll be able to open your iPod (if you’re on a PC, go to “My Computer”; if you’re on a Mac, it should appear on the desktop) as an extra hard drive, and drag and drop files onto it.

Now all you have to do is tote your iPod to your next office meeting and voila! Plug in your iPod and open ‘em up. And don’t forget to bring your iPod’s USB cord with you.

TiP #1 | iPod Reset

Signing on for the inaugural iPod Spot TiP of the day… so thought I’d start with the Grandaddy of all iPod TiPS, for when all else fails, and you need to reboot:

classic160 How to Reset Your iPod

So, your iPod is frozen. As in, not responding. It’s okay–don’t freak out! Here’s how to reset your iPod if it’s frozen, not responding, being slow, not turning on, not turning off…basically if it’s doing anything out of the ordinary.

iPod Shuffle: Super-easy! Just turn it off using the switch (this is the only iPod that has a physical switch that can be put in an “on” or “off” position). Wait at least five seconds before turning it back on. iPod Nano: Make sure your iPod Nano’s hold switch is off. Hold down the “Menu” button (on the clickwheel) and the center button (inside the clickwheel) at the same time for at least ten seconds. You will be able to tell this is working because the screen will go blank and then the Apple logo will appear. If this doesn’t work, your iPod Nano may be out of batteries–plug it in and try again. Pod Classic: If your hold switch is off, turn it on and then turn it off again. If your hold switch is on, just turn it off. Hold down the “Menu” button (on the clickwheel) and center button (inside the clickwheel) at the same time for at least ten seconds. The screen will go blank and the Apple logo will appear. If this doesn’t happen, your iPod Classic may be out of batteries–plug it in and try again. iPod Touch: Press and hold the power button (located on top of the iPod Touch) and the Home button (the only button on the face of the iPod Touch) at the same time for at least ten seconds. The screen will go blank and the Apple logo will appear. If this does not work, you may need to repeat the process but hold the buttons down for longer–15 to 20 seconds. You may also need to connect the iPod Touch to a power source.

-

Welcome to TiPS: The iPod Spot Blog…

The place where we’re all about making the most of your iPod Experience. We’ll help you find the right iPod models and accessories to match your lifestyle, and give you the answers and advice you need to get the most from your trusty companion.

We encourage you to signup and submit your tips here